Recently from Sammobiles, the official KitKat 4.4.2 firmware update for Samsung Galaxy Note II N7001 got leaked. Here in this article you’ll come across the same update to apply on your device manually. This update is dubbed as XXUFNH2 and that has many new features in lap. Besides, it has gone on floors at New Zeland and carries the product code NZC. All the users are recommended to follow the OTA update method to flash the new firmware in their device as the manual update method will be absolutely your own risk. But before that you need to fill certain requirements, otherwise called the pre-requirements for the manual update method. Have a keen look on those.
Caution: Double check the name and model of your Smartphone before initiating the update process. Being the update your own decision, by any means Blogzamana must not be blamed for any damage because the entire risk is on user. We’ll only help to solve doubts with suitable response.
Requirements:
- Samsung Galaxy Note II N70001
- Computer
- USB cable
- Backup all the personal data using backup app
- Minimum battery should be above 60%
- Enable the USB Debugging to get the device connected to computer
Download
- Samsung Kies (32 bit or 64 bit)
- KitKat 4.4.2 XXUFNH2 Firmware
- Odin
Procedure to manually update Note II N70001 with KitKat XXUFNH2 Firmware
- First check all the above requirements are fulfilled and then proceed to download files. Download the Kies and install in your computer first.
- Then download the firmware package and odin in computer. Extract both the files and place on your desktop.
- Double click on Odin to launch in computer.
- Then switch off your Galaxy Note II N70001 to enter it into download mode. To do that press VOL DOWN KEY+HOME+POWER button simultaneously. Press the VOL UP button to continue when you see a warning triangle on your device screen.
- Connect the device to computer via USB cable. The ID: COM box turns yellow after connecting the device. If this doesn’t happen then you might not have selected Kies option.
- Then select AP/PDA on the Odin screen and choose the tar.md5 file from the extracted firmware folder on desktop. Make sure that the Auto Reboot and F.Reset Time check boxes are ticked in ODIN and the Re-Partition button is unchecked.
- After choosing the right options, click on Start in Odin box to perform the firmware update. The entire process will take 4-5 minutes and the phone will reboot automatically.
- After the pass message appears, detach the cable and you are all done.
Congratulations, you have now learned the manual update method of Samsung Galaxy Note II N70001 device via Odin. The KitKat 4.4.2 XXUFNH2 firmware is the latest official update available, so don’t miss the opportunity.