Samsung Galaxy Z Flip 5G SM-F707U receives June 2021 Security update and it reached the U.S. This update is for Sprint network users with a built number F707USQS2CUE1. On Saturday night, PST, we saw the first version of this software. As a PDA detection signal, it is intended for devices with the SM-F707U model number. If you are updating the device with Odin then make sure you apply the firmware update on a particular Sprint model.
If you have a compatible device and are using security updates for 2021, you can wait for the latest version to arrive manually. This could be a few weeks later or start the installation manually. Hence, download Samsung Galaxy Z Flip 5G SM-F707U sprint (CDMA) F707USQS2CUE1 firmware on Android 11.
Caution
Make sure to cross-check the Name and model of your Galaxy Z Flip 5 SM-F707U before starting the update since it’s only meant for the said device. Using the firmware on other handsets might brick your handset or even create bugs in it. We at BlogZamana will never be blamed for any sort of issues or bugs if created in your device because of this update. So what you do is at your own risk.
Pre-requisites
- Samsung Galaxy Z Flip 5G
- Original USB Cable
- Enable USB Debugging Mode. You will find the option in the Developer Section of your device. By pressing the built number 7 time
- Back-Up all important data in your Smartphone since the update will erase all your data.
- Keep at least 70% battery back up on your Samsung Galaxy Z Flip 5G
- to avoid accidental shut down during installation.
- Make sure you install the latest firmware on the SM-F707U model only
- Make sure, the SAMSUNG-drivers are installed on your PC
- Download Odin3-v3.14.4.zip file keep in PC
- Download Android 11 F707USQS2CUE1 Firmware keep in PC
Tutorial to receive Galaxy Z Flip 5G SM-F707U June 2021 Security update in U.S.
- Download Android 11 F707USQS2CUE1 Firmware for Samsung Galaxy Z Flip 5G. Then extract the firmware file you just downloaded on your PC. You should get 5 files.
AP (System &Recovery)
BL (Bootloader)
CP (Modem / Radio)
CSC_*** (Country / Region / Operator)
HOME_CSC_*** (Country / Region / Operator)
2. Now add each file to its relevant field in Odin v3.14.4. If you want to do a clean flash then Use CSC_*** or if you want to keep your apps and data then add in HOME_CSC_***.
3. Switch off the device and then reboot your phone in Download / Odin mode pressing the POWER + VOLUME DOWN + BIXBY
4. If the above options did not work then try 5 more methods by pressing;
VOLUME DOWN + VOLUME UP than USB cable
POWER + VOLUME DOWN + VOLUME UP
POWER + VOLUME DOWN + HOME BUTTON
(Note9) USB cable + VOLUME DOWN + BIXBY
(Note10) POWER + VOLUME UP
5. Once you are in download mode then connect your phone to the PC, if possible use the original USB cable you got with your phone.
6. A BLUE box will show up with the COM port number when the Odin gets detected in your device.
7. Make sure you don’t tick any extra boxes. The only options to be ticked are F.Reset Time and Auto-reboot only.
8. After that click on the start button, wait for Odin to say ‘PASS ‘in a GREEN box.
9. Once the flash is completed then your phone will reboot and then disconnect your phone from the PC
10. Now again go to ODIN in PC and there you get AP (System &Recovery) get Extract the firmware file you just downloaded. You should get 1 file MD5-file in AP-field in Odin and add that.
11. Reboot your phone in Download mode by pressing the POWER + VOLUME DOWN + BIXBY
12. Once you are in download mode then connect your phone to the PC, if possible use the original USB cable you got with your phone.
13. A BLUE box will show up with the COM port number when the Odin gets detected in your device.
14. Make sure you don’t tick any extra boxes. The only options to be ticked are F.Reset Time and Auto-Reboot only.
15. After that click on the start button, wait for Odin to say ‘PASS ‘in a GREEN box.
Voila! The Samsung Galaxy Z Flip 5 SM-F707U June update for Sprint users in the U.S. is updated with F707USQS2CUE1 Firmware for U.S. users.