As per the latest reports, the Samsung Galaxy Mega 6.3 has started receiving the latest Android 44.2 KitKat update in Russia and the update is only available via OTA or Samsung KIES. The latest update supports the build named 9200XXUDNE4 and is supposed to hit the Mega 6.3 devices in other countries too. It’s useless to say that the new update will bring numerous improvements and bug fixes in your device including superior performance, enhanced battery life, white status bar icons, camera shortcut on the lock screen, full-screen album art, wireless printing support etc.
By default the OTA update will hit the notification panel of your device on which you can click and follow the instructions on your screen to install the firmware. But if you are desperate to do it ASAP then you can follow the given instructions below which is a complete guide to manually install the Android 4.4.2 KitKat I9200XXUDNE4 firmware on your Mega 6.3 Smartphone. But before that you need to take a complete look on the prior requirements. Have an intense look.
Caution
[highlight]Be sure that BlogZamana will not remain responsible for any sort of issues like Bugs, Brick of device or Dead SD Card, if your device experiences any during the installation process. What you do is on your own risk. Also double check the Name and model number of your device before starting the installation since it’s only meant for the Samsung Galaxy Mega 6.3 Smartphone.[/highlight]
Pre-Requisites
- One Samsung Galaxy Mega 6.3 Smartphone.
- Original Data Cable
- One PC preloaded with Samsung Galaxy Mega drivers. Else at first download and install the drivers on your PC from Samsung’s official website.
- Enable the USB Debugging Mode. You will find the option in the Developer Section of your device.
- Back Up all important data in Android your device since the unlocking process will erase all data.
- Keep at least 60% to 70% battery back up in your Galaxy Note II Smartphone to avoid accidental shut down during installation.
Downloads
Steps to Update
- First of all download the above mentioned two files and extract those to the desktop of your PC.
- Now switch off your Smartphone and boot it into download mode by long press and hold of the Volume Down Key+Home Buttom+Power Button. Press the Volume Up button to continue as soon as you see a warning triangle sign on your display.
- Now connect you device to your PC via USB and find out the ODIN.exe file on the extracted ODIN folder on your desktop. Click Run.
- You will see the ID: COM box of ODIN screen turning blue along with the COM PORT Number and Added Massage in the below screen, if your device gets connected properly.
- Now select the PDA button from the ODIN screen and select the file with .tar.md5 extension. Ensure that the Auto Reboot and F.Reset Time check boxes are ticked in ODIN and the Re-Partition button is unchecked.
- Double check the settings and hit the START button to initiate the update process.
- Wait for sometime and you will see the PASS massage on the ODIN screen with green backdrop once the flashing is complete. Disconnect your Smartphone from your PC when your device restarts.
Congrats!! Now your device has been updated with the Android 4.4.2 KitKat I9200XXUDNE4 Firmware. In case you find any issues in the update process, don’t forget to massage in the comment section.