Update Galaxy A32 5G SM-A326U1 T-Mobile, ATT & Verizon with Android 11 A326U1UEU3AUH1 Firmware

By Pam Android On Aug 24, 2021

Here we have got the official manual update for Update Galaxy A32 5G SM-A326U1. The update is available with lots of enhancements and improvements from Samsung. Update the device with Android 11 A326U1UEU3AUH1 Firmware for the T-Mobile, ATT & Verizon network only. This is an Odin flashing firmware, hence all the root access will vanish and the device will get back into the warranty.

Caution

Make sure to cross-check the Name and model of your Smartphone before starting the update since it’s only meant for the said device. Using the firmware on other handsets might brick your handset or even create bugs in it. We at BlogZamana will never be blamed for any sort of issues or bugs if created in your device because of this update. So what you do is at your own risk.

Pre-requisites

Samsung Galaxy A32 5G SM-A326U1
Original USB Cable
Enable USB Debugging Mode. You will find the option in the Developer Section of your device. By pressing the built number for 7 time
Back-Up all important data in your Smartphone since the update will erase all your data.
Keep at least 70% battery back up on your Samsung Galaxy A32 5G to avoid accidental shut down during installation.
Make sure you install the latest firmware on SM-A326U1 model only
Make sure, the SAMSUNG-drivers are installed on your PC
Download Odin3-v3.14.4.zip file keep in PC
Download Android 11 A326U1UEU3AUH1 Firmware keep in PC ATT
Download Android 11 A326U1UEU3AUH1 Firmware keep in PC T-Mobile
Download Android 11 A326U1UEU3AUH1 Firmware keep in PC Verizon

Tutorial to Update on Samsung Galaxy SM-A326U

Download Android 11 A326U1UEU3AUH1 Firmware for Samsung Galaxy A32 5G SM-A326U1. Then extract the firmware file you just downloaded on your PC. You should get 5 files.

AP (System &Recovery)

BL (Bootloader)

CP (Modem / Radio)

CSC_*** (Country / Region / Operator)

HOME_CSC_*** (Country / Region / Operator)

Now add each file to its relevant field in Odin v3.14.4. If you want to do a clean flash then Use CSC_*** or if you want to keep your apps and data then add in HOME_CSC_***.
Switch off the device and then reboot your phone in Download / Odin mode pressing the POWER + VOLUME DOWN + BIXBY
If the above options did not work then try 5 more methods by pressing;

VOLUME DOWN + VOLUME UP than USB cable
POWER + VOLUME DOWN + VOLUME UP
POWER + VOLUME DOWN + HOME BUTTON
(Note9) USB cable + VOLUME DOWN + BIXBY
(Note10) POWER + VOLUME UP

Once you are in download mode then connect your phone to the PC, if possible use the original USB cable you got with your phone.
A BLUE box will show up with the COM port number when the Odin gets detected in your device.
Make sure you don’t tick any extra boxes. The only options to be ticked are F.Reset Time and Auto-Reboot only.
After that click on the start button, wait for Odin to say ‘PASS‘in a GREEN box.
Once the flash is completed then your phone will reboot and then disconnect your phone from the PC
Now again go to ODIN in PC and there you get AP (System &Recovery) get Extract the firmware file you just downloaded. You should get 1 file MD5-file in AP-field in Odin and add that.
Reboot your phone in Download mode by pressing the POWER + VOLUME DOWN + BIXBY
Once you are in download mode then connect your phone to the PC, if possible use the original USB cable you got with your phone.
A BLUE box will show up with the COM port number when the Odin gets detected in your device.
Make sure you don’t tick any extra boxes. The only options to be ticked are F.Reset Time and Auto-Reboot only.
After that click on the start button, wait for Odin to say ‘PASS‘in a GREEN box.

Voila! The Galaxy A32 5G SM-A326U1 T-Mobile, ATT & Verizon is updated with A326U1UEU3AUH1 Firmware for USA users.