Update Samsung Galaxy Note 10 SM-N970U1 T-MOBILE with Android 11 N970U1UES6FUE1 Firmware in US

By Pam Android On Jul 16, 2021

Samsung Galaxy Note 10 now get the official Android 11 update with N970U1UES6FUE1 Firmware in US. When updated with Odin this T-Mobile gets the new enhancements and improvements. Hence, look into the article for downloading the odin and then the N970U1UES6FUE1 Firmware to update by following the guideline.

This update will recover all the root update and bugs will get fixed. The update is only for T-Mobile Galaxy Note 10.

Caution

Make sure to cross-check the Name and model of your Smartphone before starting the update since it’s only meant for the said device. Using the firmware on other handsets might brick your handset or even create bugs in it. We at BlogZamana will never be blamed for any sort of issues or bugs if created in your device because of this update. So what you do is at your own risk.

Pre-requisites

Samsung Galaxy Note 10 SM-N970U1
Original USB Cable
Enable USB Debugging Mode. You will find the option in the Developer Section of your device. By pressing the built number 7 time
Back-Up all important data in your Smartphone since the update will erase all your data.
Keep at least 70% battery back up on your Samsung Galaxy Note 10 SM-N970U1 to avoid accidental shut down during installation.
Make sure you install the latest firmware on the SM-N970U1 model only
Make sure, the SAMSUNG-drivers are installed on your PC
Download Odin3-v3.14.4.zip file keep in PC
Download Android 11 N970U1UES6FUE1 Firmware keep in PC

Tutorial to Update Samsung Galaxy Note 10 SM-N970U1 on Android 11 N970U1UES6FUE1 Firmware In U.S.

Download Android 11 N970U1UES6FUE1 Firmware for Samsung Galaxy Note 10 SM-N970U1. Then extract the firmware file you just downloaded on your PC. You should get 5 files.

AP (System &Recovery)

BL (Bootloader)

CP (Modem / Radio)

CSC_*** (Country / Region / Operator

HOME_CSC_*** (Country / Region / Operator)

2. Now add each file to its relevant field in Odin v3.14.4. If you want to do a clean flash then Use CSC_*** or if you want to keep your apps and data then add in HOME_CSC_***.

3. Switch off the device and then reboot your phone in Download / Odin mode pressing the POWER + VOLUME DOWN + BIXBY

4. If the above options did not work then try 5 more methods by pressing;

5. Once you are in download mode then connect your phone to the PC, if possible use the original USB cable you got with your phone.

VOLUME DOWN + VOLUME UP then USB cable

POWER + VOLUME DOWN + VOLUME UP

POWER + VOLUME DOWN + HOME BUTTON

(Note9) USB cable + VOLUME DOWN + BIXBY

(Note10) POWER + VOLUME UP

6. A BLUE box will show up with the COM port number when the Odin gets detected in your device.

7. Make sure you don’t tick any extra boxes. The only options to be ticked are F.Reset Time and Auto-reboot only.

8. After that click on the start button, wait for Odin to say ‘PASS ‘in a GREEN box.

9. Once the flash is completed then your phone will reboot and then disconnect your phone from the PC

10. Now again go to ODIN in PC and there you get AP (System &Recovery) get Extract the firmware file you just downloaded. You should get 1 file MD5-file in AP-field in Odin and add that.

11. Reboot your phone in Download mode by pressing the POWER + VOLUME DOWN + BIXBY

12.Once you are in download mode then connect your phone to the PC, if possible use the original USB cable you got with your phone.

13. A BLUE box will show up with the COM port number when the Odin gets detected in your device.

14. Make sure you don’t tick any extra boxes. The only options to be ticked are F.Reset Time and Auto-Reboot only.

15. After that click on the start button, wait for Odin to say ‘PASS ‘in a GREEN box.

Voila! The Samsung Galaxy Note 10 SM-N970U1 US version is updated with N970U1UES6FUE1 Firmware for Indian users.