Now update your Samsung Galaxy J8 SM-J810F with J810FJXU5CUF2 Firmware. The update is available for Kazakhstan users and can update through ODIN flashing by extracting the file which is available for download. It is an Android 10 update and lets hope for Android 11 or 12 update in near future.
Caution
Make sure to cross-check the Name and model of your Smartphone before starting the update since it’s only meant for the said device. Using the firmware on other handsets might brick your handset or even create bugs in it. We at BlogZamana will never be blamed for any sort of issues or bugs if created in your device because of this update. So what you do is at your own risk.
Pre-requisites
- Samsung Galaxy J8 SM-J810F
- Original USB Cable
- Enable USB Debugging Mode. You will find the option in the Developer Section of your device. By pressing the built number 7 time
- Back-Up all important data in your Smartphone since the update will erase all your data.
- Keep at least 70% battery back up on your Samsung Galaxy J8 SM-J810F to avoid accidental shut down during installation.
- Make sure you install the latest firmware on the SM-M515F model only
- Make sure, the SAMSUNG-drivers are installed on your PC
- Download Odin3-v3.14.4.zip file keep in PC
- Download Android 10 J810FJXU5CUF2 Firmware keep in PC
Tutorial to Update Galaxy J8 SM-J810F on Android 10 J810FJXU5CUF2 Firmware In Kazakhstan
- Download Android 10 J810FJXU5CUF2 Firmware for Samsung Galaxy J8 SM-J810F. Then extract the firmware file you just downloaded on your PC. You should get 5 files.
AP (System &Recovery)
BL (Bootloader)
CP (Modem / Radio)
CSC_*** (Country / Region / Operator
HOME_CSC_*** (Country / Region / Operator)
2. Now add each file to its relevant field in Odin v3.14.4. If you want to do a clean flash then Use CSC_*** or if you want to keep your apps and data then add in HOME_CSC_***.
3. Switch off the device and then reboot your phone in Download / Odin mode pressing the POWER + VOLUME DOWN + BIXBY
4. If the above options did not work then try 5 more methods by pressing;
5. Once you are in download mode then connect your phone to the PC, if possible use the original USB cable you got with your phone.
VOLUME DOWN + VOLUME UP then USB cable
POWER + VOLUME DOWN + VOLUME UP
POWER + VOLUME DOWN + HOME BUTTON
(Note9) USB cable + VOLUME DOWN + BIXBY
(Note10) POWER + VOLUME UP
6. A BLUE box will show up with the COM port number when the Odin gets detected in your device.
7. Make sure you don’t tick any extra boxes. The only options to be ticked are F.Reset Time and Auto-reboot only.
8. After that click on the start button, wait for Odin to say ‘PASS ‘in a GREEN box.
9. Flashing gets complete then your phone will reboot and then disconnect your phone from the PC
10. Now again go to ODIN in PC and there you get AP (System &Recovery) get Extract the firmware file you just downloaded. You should get 1 file MD5-file in AP-field in Odin and add that.
11. Reboot your phone in Download mode by pressing the POWER + VOLUME DOWN + BIXBY
12. Once you are in download mode then connect your phone to the PC, if possible use the original USB cable you got with your phone
13. A BLUE box shown up with the COM port number when the Odin gets appear in your device.
14. Make sure you don’t tick any extra boxes. The only options which is tick includes F.Reset Time and Auto-Reboot.
15. After that click on the start button, wait for Odin to say ‘PASS ‘in a GREEN box.
Voila! The Samsung Galaxy J8 SM-J810F version is now updates with J810FJXU5CUF2 Firmware for Kazakhstan users.